Before You Begin (cont.)
For replacement installations, make sure the existing cutout is the
same size or smaller than needed for the new lavatory.
Refer to the roughing-in information to ensure proper installation
for ADA applications.
Use these instructions for wall-mount, self-rimming and above
counter installations. Follow only the instructions that apply to
your installation.
You can choose between a wall-mount or countertop faucet
installation, depending upon the setting and styling you desire. A
wall-mount faucet is recommended.
To ease forming of the supplied adhesive seal, install this lavatory
when the temperature is between 70° (21 C) and 100° F (38 C).
KohlerCo.31018897-2-A
To Next Page
