Kohler K-352 Installation Guide

3. Install the Handshower Holder
For all models:
Secure the bracket to the wall with the screws provided.
Apply clear silicone sealant to the back of the escutcheon on the
body of the handshower holder. Allow the silicone sealant to set
according to the sealant manufacturer’s instructions.
For K-352, K-975, and K-10599 only:
Thread the body of the handshower holder onto the bracket.
Wipe away any excess sealant with a clean rag.
For K-422 only:
Position the body of the handshower holder onto the bracket with
the setscrew hole facing toward the floor.
Verify that the handshower holder is level and flush with the
wall.
Secure the body to the bracket with the setscrew.
Body
Bracket
Thread the body onto the bracket.
K-352, K-975 (shown), and
K-10599 Only
Apply silicone
sealant to
escutcheon.
Body
K-422 Only
Bracket
Setscrew
Secure the body to the
bracket with the setscrew.
Apply silicone
sealant to
escutcheon.
1045302-2-B 4 Kohler Co.

Kohler K-352 Specifications

General

Brand	Kohler
Model	K-352
Category	Plumbing Product
Language	English