9. Install the Faceplate
Finished
Wall
Mounting Frame
Faceplate
Open Position
Lock Position
Install the locking pins into the mounting frame from the faceplate kit.
Turn the locking pins to the “Open” position.
Align the mounting frame with the tank opening, and install the mounting frame against the nished wall.
If needed trim the locking pins.
Turn the locking pins to the “Lock” position.
Position the faceplate over the push rods and press it into place.
Proceed to the bowl Installation Instructions to complete the installation.
Kohler Co. 13
1430967-2-B
To Next Page
Loading...
