Test the Functions
Wrap the seat with plastic wrap to prevent water from spraying
from the toilet during testing.
The seat is designed not to function without an occupant. To
activate the seat controls for testing purposes, when facing the
toilet, place your hand or a damp wash cloth on the right side of
the seat approximately 1/3 from the front of the seat (as
illustrated).
Proceed to the ″Remote/KeypadDiagram″ and “Operation”
section to test the various seat functions.
Supply Stop
GFCI/RCD-
Protected
Receptacle
1093479-2-A 20 Kohler Co.
To Next Page
Loading...
