Notes
Required Electrical Service
Install this product according to the installation
guide.
120 V, 15 A, 60 Hz
Technical Information
If used for bath-shower system, the bath spout
must be connected to the #1 outlet port and
restricted to 10 gal/min (37.9 l/min) maximum.
All product dimensions are nominal.
Provide access for servicing valve.
Use 1/2" supply lines.
Do not install this valve in walls exposed to
subfreezing temperatures.
Avoid mounting the valve in a wall adjacent to a
frequently occupied room, such as a bedroom or
living room.
Pressure regulators are strongly recommended
in applications where large pressure swings are
anticipated or pressure differences between the
supplies exist, such as commercial installations
with separate hot and cold supply systems.
Water hammer arrestors and shut-offs are
required in both the hot and cold supplies.
A 1/2" cap must be installed on any unused outlet.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
4-18-2015 07:42
Digital Three Port Thermostatic Valve
K-557-K
To Previous Page
Loading...
