1. Roughing-In and Preparation
IMPORTANT! Before installing this sink, verify the distance from
the top of the cabinet to the top of the doors (A) is greater than the
apron height.
TIP: Apply painter’s tape to the cabinet to mark cuts and protect the
cabinet surfaces when cutting.
Position the template on the front of the cabinet, flush with the
top and centered left to right; secure with tape.
Trace the template and remove.
Cut the cabinet along the traced line.
A =
A
Apron
8-13/16"
(224 mm)
Top of Cabinet to Top of Doors
Trace the template onto
the cabinet and cut along
the traced line.
Kohler Co. 3 1218029-2-C
To Next Page
Loading...
