Removing the Vandal Resistant Plug
NOTE: Disassemble the faucet following the steps in the
″Disassemble/Reassemble the Faucet″ section.
From inside the faucet body, use a screwdriver to pop out the
vandal-resistant plug button.
If you are adjusting the temperature, go to the ″Temperature
Limiting Adjustment″ section and follow the instructions.
If you are installing the handle assembly, refer to the illustration
in the ″Temperature Limiting Adjustment″ section.
Position the plug button and firmly press into place.
Vandal-Resistant
Plug Button
1244026-5-A 4 Kohler Co.
To Next Page
Loading...
Need help?
General
