Service the Battery
Applies to K-13460, K-13461, K-13466, K-13467, K-13472, and
K-13473.
Disassemble the faucet to access the battery case. Refer to the
″Disassemble/Reassemble the Faucet″ section.
Using a small torx screwdriver, remove and retain the two screws
from the battery case cover.
Insert two AAA Alkaline batteries (not provided) into the battery
case.
Reinstall the two screws into the battery case.
Reassemble the faucet.
Wait approximately 2 minutes to allow the faucet to cycle through
the automatic sensing distance before use.
Battery Case
Battery Cover
Screws
AAA Alkaline batteries
Kohler Co. 7 1244026-5-A
To Next Page
Loading...
Need help?
General
