Tools
Important Information
NOTICE: Choose an automatic compensating valve with the
appropriate minimum flow rate to assure your valve will provide
safety at the lowest flow rates.
•
For a showerhead rated at 2.5 gal/min (9.5 l/min) maximum, use
with an automatic compensating valve rated at 2.0 gal/min (7.6
l/min) or less.
Observe all local plumbing and building codes.
Inspect the supply piping for damage. Replace as necessary.
For service parts information, visit your product page at
www.kohler.com/serviceparts.
Sealant
Tape
• Close or 1-1/2" nipple
• Female fittings
• 1/2" copper tubing
• 2x2's and 2x4's
• Conventional woodworking
tools and materials
Phillips
Screwdriver
Plus:
Note: All nipples and fittings
are 1/2" NPT
5/64" & 5/32"
Hex Wrenches
Socket Wrench with 11 mm or
7/16" Socket and Extension
Masking
Tape
Soldering Supplies
1207715-2-B 2 Kohler Co.
To Next Page
Loading...
