Before You Begin
CAUTION: Risk of restricted water flow and product damage.
Supply hoses must not be taut, kinked, or twisted during
installation.
IMPORTANT! Risk of restricted waterflow. The spray hose must
not be taut or kinked when installed.
NOTE: Allow adequate clearance for servicing.
Before installing the faucet, make sure the cabinet area under the
sink can accommodate all of the required components.
If installing the optional power supply, make sure that there is an
unswitched 120 V electrical outlet within reach.
Copper Outlet Tube
Supply Hose
Valve Box
Spray Hose Weight
Spray Hose
Supply Stop
Battery Holder
Unswitched
Electrical
Outlet
(Optional)
Battery Holder Wire
1320925-2-C 4 Kohler Co.
To Next Page
Loading...
