5. Complete the Installation
Position the Spray Hose Weight
NOTICE: Make sure that the spray hose weight will not interfere
with the valve box or wire connections.
Position the weight on the spray hose as shown and squeeze to
connect the clasp.
Extend and retract the spray hose to check for smooth operation.
Adjust the location of the weight as necessary.
Check for Leaks
Ensure all connections are tight.
Turn on the water supplies and check all connections for leaks.
Test the faucet for proper operation. Refer to the ″Faucet
Operation″ section.
2" (51 mm) –
3" (76 mm)
2" (51 mm) –
3" (76 mm)
Kohler Co. 9 1320925-2-C
To Next Page
Loading...
