11 MAINTENANCE
Before performing any maintenance operations, be sure to turn off the
power and turn off the machine by pressing the button (4).
ou can use a slightly damp cloth to clean the product body
Important tips: Do not use any abrasive materials to prevent damage to
he equipment surface.
Filter
Filter operating
replacement
frequency
Activated carbon
and HEPA
Operation Frequency
Composite filter cha nge
every 6 months
This data is ca culated based on the use of low grade purification wind speed,
using 8 hours a day;
The recommended fi ter replacement frequency wil vary depending on the
duration of use and the working environment. When the filter needs to be
replaced, the power light wil start blinking.
Attention! When your purifier motor stops working, please check if the filter
needs to be replaced.
To Next Page
Loading...