1. Make sure your mobile device has
already been connected to the
wireless network which you wish to use.
Also, you need to forget other irrelevant
wireless network in case it influences
your configuration process.
2. Disconnect the power supply of AC.
3. Connect the power supply of AC and
continuously press the “LED DISPLAY” or
“DO NOT DISTURB” button seven times
in 10 seconds.
4. When the AC displays “AP”, it means
that the AC wireless has already
entered into “AP” mode.
Some type of AC does not need step 2 to
be in AP mode.
֍ Using Android device to do network
configuration
To Next Page
Loading...