Komatsu 4D95LE-2 - Page 92

95-2 SERIES
12-71
1
TESTING AND ADJUSTING FUEL SYSTEM
Exhaust
temperature
(°C)
Lubrication
oil pressure
(MPa{kg/cm
2
})
Lubrication oil
temperature
(°C)
Fuel
consumption
(sec/200cc)
Flywheel
horsepower
(kW{HP})
40.9 – 43.4(Gross) — Min. 80 – 95 90 – 110 0.34 – 0.54 Max. 650
{54.8 – 58.2}(Gross) {3.5 – 5.0}
— 233 – 245 — 80 – 95 90 – 110 0.34 – 0.54 Max. 650
{23.8 – 25.0} {3.5 – 5.0}
— — — 80 – 95 90 – 110 0.34 – 0.54 —
{3.5 – 5.0}
— — — 80 – 95 80 – 110 Min. 0.18 {1.8} —
39.7 – 43.8(Gross) — Min. 80 – 95 90 – 110 0.34 – 0.54 Max. 650
{53.2 – 58.8}(Gross) {3.5 – 5.0}
—
229 – 246(Gross) — 80 – 95 90 – 110 0.34 – 0.54 Max. 650
{23.4 – 25.1}(Gross) {3.5 – 5.0}
— — — 80 – 95 90 – 110 0.34 – 0.54 —
{3.5 – 5.0}
— — — 80 – 95 80 – 110 Min. 0.18 {1.8} —
Torque
(kW{kgm})
Coolant
temperature
(°C)
fl For fuel, use ASTM D975 No. 1 or No. 2.
fl For lubricant, use SAE15W-40 or SAE30 oil.