Precautions for Safe Servicing
(A) Service Shop (Place)
(WARNING)
l Place allowing sufficient ventilation
Jobs such as engine running, part welding and polishing the
paint with sandpaper should be done in a well-ventilated place.
[Otherwise]
Very dangerous for human body due to the possibility of
poisonous gas or dust inhalation.
(a_)
l
Sufficiently wide and flat place
The floor space of the service shop for inspection and mainte-
nance shall be sufficiently wide and flat without any hole.
[Otherwise]
An accident such as a violent fall may be caused.
l Clean, orderly arranged place
No dust, mud, oil or parts shall left uncleaned on the floor sur-
face.
[Otherwise]
An unexpected accident may be caused.
Bright, safely illuminated place
The working place should be illuminated sufficiently and safely.
For a job in a dark position involving difficulty in observation,
use a portable safety lamp. The bulb shall be covered with a
wire cage.
[Otherwise]
The bulb may be broken accidentally to cause ignition of
leaking oil.
/ [cnuTloN] l
d
+
I
Place equipped with a fire extinguisher
Keep a fast aid kit and fire extinguisher close at hand in prepa-
ration for an emergency of fire starting.
o-3
To Next Page
Loading...
