82E-5 – 98E-5 SERIES 7-5
7. FUEL INJECTION PUMP/GOVERNOR
Point 3
[Disassemble]
There is an acoustic material part to name as fuel injection pump spacer between the fuel injection pump and
the cylinder block. Loosen fuel injection pump installation bolts with a closed wrench when disassembling a fuel
injection pump.
[NOTICE]
An intake manifold may obstruct the disassembly of the fuel injection pump by the engine model. Remove
the fuel injection pump after removing the intake manifold first.
[Reassemble]
When installing a fuel injection pump on the gear case, put a fuel injection pump spacer between the cylinder
blocks, and install it.
To Next Page
Loading...
