82E-5 – 98E-5 SERIES 00-3
SAFETY LABELS
SAFETY LABELS
• Most accidents are caused by negligence of basic safety rules and precautions. For accident prevention, it
is important to avoid such causes before development to accidents.
Please read this manual carefully before starting repair or maintenance to fully understand safety precau-
tions and appropriate inspection and maintenance procedures.
Attempting at a repair or maintenance job without sufficient knowledge may cause an unexpected accident.
• It is impossible to cover every possible danger in repair or maintenance in the manual. Sufficient consider-
ation for safety is required in addition to the matters marked . Especially for safety precautions
in a repair or maintenance job not described in this manual, receive instructions from a knowledgeable lead-
er.
• Safety marks used in this manual and their meanings are as follows:
•
NOTICE – indicates that if not observed, the product performance or quality may not be guaranteed.
DANGER – indicates an imminently hazardous situation which, if not
avoided, WILL result in death or serious injury.
WARNING – indicates a potentially hazardous situation which, if not
avoided, COULD result in death or serious injury.
CAUTION – indicates a potentially hazardous situation which, if not
avoided, MAY result in minor or moderate injury.
To Next Page
Loading...
