00-4 82E-5 – 98E-5 SERIES
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
(1) SERVICE AREA
• Sufficient Ventilation
Inhalation of exhaust fumes and dust particles may be hazardous to
ones health. Running engines welding, sanding, painting, and polishing
tasks should be only done in well ventilated areas.
• Safe / Adequate Work Area
The service area should be clean, spacious, level and free from holes in
the floor, to prevent "slip" or "trip and fall" type accidents.
• Bright, Safely Illuminated Area
The work area should be well lit or illuminated in a safe manner. For
work in enclosed or dark areas, a "drop cord" should be utilized. The
drop cord must have a wire cage to prevent bulb breakage and possible
ignition of flammable substances.
• Safety Equipment
Fire extinguisher(s), first aid kit and eye wash / shower station should be
close at hand (or easily accessible) in case of an emergency.
To Next Page
Loading...
