5.
On “Project Files”
screen, press “Copy...”.
6.
On “Copy files” screen, select “D: to 3DMC folder”.
7.
Select a project file to be imported to the internal memory
of the control box, and press
“Ok”.
The selected project file is imported into the internal mem-
ory of the control box.
8.
On “Project Files” screen, select the imported file, and
press “Ok”.
The
imported project file is set as the current work in the
control box.
REMARK
• If a project file is saved already in the internal memory of the control box, select the one to use.
• When reading the Project files obtained from the Sitelink3D server, select “Sitelink3D inbox to 3DMC fold-
er”.
METHOD FOR IMPORTING PROJECT FILES
When importing project files into the internal memory of the control box, perform the following procedure.
HANDLE CONTROL BOX FILE MENU
4-9
To Next Page
Loading...
