To Next PageTo Next Page
Need help?Do you have a question about the Komatsu PC210LC-11 and is the answer not in the manual?
General| Engine Model | Komatsu SAA6D107E-3 |
|---|---|
| Travel Speed | 3.1 mph |
| Bucket Capacity | 0.50 - 1.30 m³ |
| Max Reach | 9.04 - 10.13 m |
| Net Horsepower | 173 HP |
| Operating Weight (lb) | 50, 700 lb |
| Bucket Capacity (cu yd) | 1.05 - 1.57 cu yd |
| Maximum Digging Depth (ft in) | 23 ft 7 in |
| Maximum Reach Along Ground (ft in) | 32 ft 6 in |
| Engine Power (HP) | 173 HP |
| Bucket Capacity (m³) | 0.50 - 1.30 m³ |
| Max. Digging Depth | 23 ft 7 in |
| Max. Reach at Ground Level | 9.04 - 10.13 m |
Details the importance of reading and understanding the manual for safe operation and maintenance.
Governs the processing of personal data collected through Machine Monitoring Systems (MMS).
Explains the signal words and safety alert symbols used in the manual and on machine labels.
Describes safety labels using pictograms to indicate safety procedures and hazard levels.
Provides information on machine noise levels and affixed labels.
Details vibration levels for the excavator and guides to reduce them.
Details the main uses of the Komatsu machine and specific work procedures.
Explains engine technology for emission conformity, including KDPF and SCR systems.
Provides details on product identification numbers and engine number plates.
Illustrates the location and components of the machine's serial plate.
Declares the machine's compliance with relevant EC Directives.
Details on handling warning signs and safety labels, ensuring they are clean and readable.
Common safety precautions for operating, inspecting, and maintaining the machine.
Specific safety measures to be taken during machine operation on job sites.
Safety guidelines for transporting the machine, including loading and unloading.
Safety measures to be observed before, during, and after maintenance operations.
Provides an overview of the machine's main components and their layout.
Identifies and describes the various equipment located within the operator's cab.
Details the names and locations of all controls and gauges in the operator's cab.
Explains the function and meaning of various machine components and displays.
Guides on the basic operation and screen transitions of the machine monitor.
Explains how warnings and action levels are displayed on the machine monitor.
Describes the function of pilot lamps and various meters on the machine monitor.
Details how to adjust various machine settings via the monitor.
Explains how to operate the work equipment using the control levers.
Lists operations that are dangerous and must be avoided for safety and machine longevity.
Step-by-step guide for inspecting, cleaning, and replacing the air cleaner element.
Procedure for changing the hydraulic oil in the machine's hydraulic tank.
Highlights the importance of periodically replacing safety-related parts.
Instructions for cleaning the Komatsu Diesel Particulate Filter (KDPF).
Procedure for replacing the Diesel Exhaust Fluid (DEF) filter.
Guidance on safe dismantling of the machine at the end of its service life.
Table detailing various specifications for the hydraulic excavator models.
Explanation of the lift capacity chart for the 1-piece boom configuration.
Explanation of the lift capacity chart for the 2-piece boom configuration.
Essential safety precautions for selecting, installing, removing, and using attachments.
Information on the quick coupler system, handling, and operation.
General view, operation, and maintenance of the 2-piece boom.
Details on the super long front boom and arm, including specifications and operations.
Precautions and procedures for operating the bucket with an attached hook.
Explains components and procedures for preparing the machine for attachment installation.
Overview and operation of the tool control system and its monitor.
Guidance on selecting the appropriate track shoes based on operating conditions.
Recommendations for selecting bucket teeth based on working conditions.
Precautions and guidelines for operating various attachments like hydraulic breakers.
Information on parts with a defined service life that require periodic replacement.
List of consumable parts, their part numbers, and replacement intervals.
Recommendations for fuel, coolant, and lubricant types and their usage.
