Need help?Do you have a question about the Kongsberg 3710 and is the answer not in the manual?
Provides information for the intended audience of the manual.
Explains the conventions and symbols used throughout the document.
Details limitations related to the product's guarantee and usage.
Instructions for the proper disposal of electrical and electronic components.
Guidelines for safely handling and storing the equipment.
Outlines the intended use and various applications of the DGNSS receiver.
Lists the key capabilities and characteristics of the DGNSS system.
Explains the signal processing core and multiplexing capabilities for DGNSS corrections.
Specifies the height, width, depth, weight, and colour of the Receiver Unit and antenna.
Details the voltage, power consumption, and battery requirements for the Receiver Unit.
Lists operating and storage temperature ranges, humidity, and ingress protection ratings.
Describes the serial port, LAN, and USB connections available on the Receiver Unit.
Cites electrical safety, EMC, and vibration standards applicable to the Receiver Unit.
Specifies the frequency range for the DGNSS antenna.
Outlines the message format and type for correction data output from the Receiver Unit.
Details the front and rear interfaces and pin layout for the Receiver Unit.
Covers safety guidelines and personnel qualifications for installation tasks.
Provides critical guidance on selecting optimal locations for the GNSS antenna and Receiver Unit.
Details the procedures and precautions for installing DGNSS antennas and their associated cabling.
Explains the steps for connecting power and data cables to the Receiver Unit.
Describes the button functions for navigating the Receiver Unit's menu system.
Explains the meaning of the front panel LED indicators for status monitoring.
Guides the user through the initial configuration and setup of the Receiver Unit.
Provides instructions on how to properly shut down the Receiver Unit.
Illustrates the structure of the receiver's menu system, including status and configuration submenus.
Displays key operational status information and subscription details for the receiver.
Details how to view and configure satellite status, frequency, and symbol rate.
Covers NTRIP configuration, including host, port, username, password, and source selection.
Explains network status and configuration settings, including IP address, netmask, and gateway.
Provides access to unit restart, factory reset, alarms, display settings, and logging functions.
Displays information about the receiver, including serial number, subscription, and software versions.
Covers software upgrades and cleaning of the unit's air inlet to ensure optimal performance.
Outlines procedures for exchanging antenna cables, antennas, and installing spare receiver units.
Offers guidance for diagnosing and resolving common system issues, including power and output problems.
Presents detailed outline drawings showing the mechanical dimensions of the Receiver Unit.
Explains the configuration steps for interfacing the Receiver Unit with a Processing Unit via serial or Ethernet.
To Next Page
General