Konica Minolta CL-70F - Page 115

102
6. Measurement Tool [Tool Box] Screen
2.
Set a Exposure Time for ambient measurement.
Select Auto, 0.1 sec or 1.0 sec.
3.
Touch the [OK] button.
Conrms and returns to the Tool Box screen.
To return to the Tool o screen without conrming, touch the Cancel button.
The selected status will be displayed on the Tool Box.
The Exposure Time has been set for a xed 1. second measurement.
NOTE
In Auto mode, the CL-70F automatically selects among 15 measuring times, determined
by the illumination available, to achieve a proper result in a convenient way.
Two ed reading times are available to enable eact comparison of multiple
measurements.
When measuring high illuminance levels, set the Exposure Time to 0.1 sec. When
taking measurements in low Illuminance, set the Exposure time for 1.0 sec.
Exposure Time Screen
[Cancel] Button
[OK] Button
The selected button will be displayed
encircled in blue.
Tool Box Screen
The selected exposure
time is displayed.
The selected exposure
time is displayed on the
Measurement screen.