122
7. Meter Settings [Setting] Screen
7-3 Preset Editing
Select [Preset Editing (2°)] button or [Preset Editing (10°)] button.
Preset value is used for the reference value in Monitor Function.
This preset reference value can be input manually or set from memorized value if
there is data in meter's memory.
Refer to page 156 for details on Field of View (2 degrees and 10 degrees).
* If no value is stored in
memory, the [Memory]
button is not activated.
NOTE
Up to 5 presets can be registered for each of viewing angle 2° and 10°.
Preset Editing Screen
(Page 1)
Preset Editing Screen
(Page 2)
Preset Editing Screen
(Page 3)
[Close] Button[Memory] Button
To page 1 To page 2To page 2 To page 3
To Next Page
Loading...
