150
8. Hardware Setting Screen
Operation
1.
While holding the Menu Button 6, press the Power Button 3.
* Continue to hold down both buttons for approximately 10 seconds until the Hardware
Setting screen appears.
If the buttons are released before the Hardware Setting screen is displayed, the
Measurement screen will be displayed.
The Hardware Setting screen will be displayed.
2.
Touch the desired menu item.
The setting screen of the selected item will be displayed.
Refer to the explanations on the following page for each item setting.
3.
When completed, touch the [Close] button.
This will return the display to the Display Mode Selection screen.
Menu Button
6
Power Button
3
To Next Page
Loading...
