Konica Minolta CL-70F - Page 165

152
8. Hardware Setting Screen
2.
Touch the center of the white cross in the upper left corner of the
screen.
The touch position will be shown as a coinciding red cross cursor, and the white
cross cursor will appear at the next position.
3.
Repeat in 7 places.
Continue and repeat in 7 places.
When nished, "Press the "O" to determine the touch panel adjustment." will be
displayed.
4.
Touch the [O] button.
Adjustment of touch panel is completed, and the display returns to the Hardware
Setting screen.
To r e t u rn t o the H a rdwa r e Sett i n g sc r e en w i t h out a d just i n g the s etti n g , to u c h the [ Canc e l ]
button.
Touch panel adjustment is completed.
[Cancel] Button
[OK] Button
Adjust Touch Panel
Conrmation Screen
Adjust Touch Panel
Screen
The touch position is showed
with a red cross cursor
The white cross appears
at the next position