Konica Minolta CL-70F - Page 36

23
4. Setting the Measuring Conditions
Operation
1.
Touch the [Measuring Mode] icon in the upper left corner of the screen.
The Measuring Mode Selection screen will be displayed.
2.
Touch an icon to select the measuring mode.
Select the desired measuring mode.
3.
Touch the [OK] button.
Conrms the settings, and returns to the previous Measurement screen.
Touch Cancel to return to the previous measurement screen without setting.
NOTE
●
mbient light includes continuous light sources such as natural light sunlight),
tungsten lamps, uorescent lamps, L lights, etc.
●
Flash light includes brief and intense burst of light sources such as electronic
ash units or ash bulbs.
Measuring Mode
Selection Screen
Measuring Screen
in Text Mode
Measuring Screen
in Text Mode
Measuring Mode
Selection Screen
[Measuring
Mode] Icon
.) mbient Light ModeCordless Mode
[OK] Button
[Cancel]
Button