Konica Minolta CL-70F - Page 43

0
4. Setting the Measuring Conditions
Operation
1.
Touch the [Display Mode] icon on the Measurement screen or
press Menu Button 6 on the meter.
The Display Mode Selection screen will be displayed. (
¨
P28)
isplay modes from o. to  are for measurement.
isplay mode o. is for settings.
2.
Touch a desired Display Icon.
The measurement screen in selected Display Mode appears on the screen.
3.
Touch the [Exposure Time] indication in the Measurement screen.
Set the exposure time to Auto, 0.1 sec, or 1.0 sec during ambient light
measurement. (
¨
P24)
Display Mode
Selection Screen (2°)
Measurement Screen
Text Mode
Touch the
Tet icon