Konica Minolta CL-70F - Displaying in Spectrum Graph [Spectrum] Mode

35
4. Setting the Measuring Conditions
4-3-2 Displaying in Spectrum Graph [Spectrum] Mode
isplays three user-selected values and spectral distribution graph.
Operation
1.
Touch the [Spectrum] icon on the Display Mode screen.
A spectrum distribution graph screen will be displayed. (
¨
P28)
2.
Touch the [Measuring Mode] icon.
The Measuring Mode Selection screen will be displayed. Select the desired
measuring mode to use. (
¨
P22)
3.
Touch the [Display Item] indication to change.
The Display item library screen will be displayed. (
¨
P33)
Touch the desired isplay Item and  button.
4.
Touch the [Exposure Time] indication in the Measurement screen.
Set the exposure time to Auto, 0.1 sec, or 1.0 sec during ambient light
measurement. (
¨
P24)
[Measuring Mode] Icon
isplay Item Indication
isplay Mode Icon
Spectrum isplay
Spectrum Screen
posure Time Indication