64
5. Measuring Light Sources [Measurement Screen]
NOTE
You can select a previously created Preset value from Preset Selection in the
Tool o.
¨
P122)
If no presets have been created, the reset Selection will be grayed out and
touching the button will not display the Preset Selection Display.
NOTICE
A Preset value must be created and saved in the Preset Editing function
under the "Setting Mode" icon before it can be used.
Preset Selection buttons will be grayed out until settings are created.
Tool Box Screen Preset Selection Screen Tool Box Screen
The set content
is displayed
The selected Preset
No. is displayed
To Next Page
Loading...
