Konica Minolta CS-7 - Page 163

163
Chapter 6
6.5 Exposure Screen ([Output] Tab) Functions
4
Change the trimming size.
Icon/Function name Functions
TrimmingSize
Select the cropping size. Set
the trimming size type during
installation.
Select the direction (portrait or
landscape) of the output.
Adjust the cropping width. The
width changes every time the
button is pressed.
Adjust the cropping height. The
height changes every time the
button is pressed.
Returns to the state when im-
age was displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• You can long press and drag the trimming frame. The
trimming frame is highlighted when selected, and the
original position is shown by dotted lines.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Press [ ].
• The image is output to the host (electronic medi-
cal record), and [
] is displayed in the image
display area.
• [ ] changes to [ ] indicating that output
is done.
HINT
•••••••••••••••••••••••••••••••••••••
• The same procedure applies when outputting to an
electronic medical record.
•••••••••••••••••••••••••••••••••••••••••••••••••••••