Konica Minolta CS-7 - Grid Removal;Scattered Radiation; Correction

184
6.7 Functions of the viewer screen
6.7.9 Grid removal/Scattered
radiation correction
This device performs the automatic removal process of
the grid, but the grid can be removed again manually
as necessary.
Scattered radiation can also be corrected manually.
HINT
•••••••••••••••••••••••••••••••••••••
• Set the irradiation field size to at least 10x10 cm to
use the grid. If the area is less than 10x10cm, auto-
matic grid recognition may fail during the grid removal
process.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Grid removal
1
Select the image to remove the grid again.
2
Press one of [ROI Adjustment], [Masking],
[Cropping], or [Viewer].
• The viewer screen is displayed.
3
Press [Grid Suppress].
• Control panel to adjust the parameters is displayed.
4
Remove the grid again.
• Select the grid direction and grid density.
HINT
•••••••••••••••••••••••••••••••••••••
• You can also remove the grid when correcting scat-
tered radiation.
• After grid is removed from One Shot stitching images,
the system automatically returns to the exposure
screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Press [Return] after the grid is removed again.
• Returns to the exposure screen.