Konica Minolta CS-7 - EMR Image; Status of RIS-OUT

195
Chapter 6
6.8 Functions of the system monitor screen
6.8.8 Status of RIS-OUT
The status of higher systems connected to this device
can be conrmed.
(10)
(2)
(1)
(3)
(4)
(6)
(5)
(8)
(7)
(9)
Number Name Functions
(1)
RIS-OUT infor-
mation
The higher system name and
error description
are displayed.
(2) Status
Higher system IP address, port
number, AE title, ping status, and
device condition are displayed.
(3) Ping button Press to conrm the ping status.
(4) Route button Press to conrm Route information.
(5)
Untransmitted
examinations
The number of untransmitted
examinations is displayed.
(6)
Output switch
button
Switches between [ON] and [OFF]
of output to a higher system. Out-
puts when set to [ON], and does not
output to a higher system when set
to [OFF] and the output reserva-
tion (queue) remains in this device.
Switches between [ON] and [OFF]
every time the button is pressed.
(7)
Output reserva-
tion list
Output reservations (queues) re-
maining in this device are displayed.
(8)
Delete button,
Select All
button,
Clear All button
Deletes output reservations be-
ing displayed in the output res-
ervation list. Select a displayed
output reservation and press
[Delete] to delete. To delete all
output reservations, press [Se-
lect All] and then press [Delete].
When [Clear All] is pressed, the
selected state is released.
(9)
Primary/Second-
ary button
Switches between standard
RIS-OUT and backup RIS-OUT
when used normally. When the
standard RIS-OUT is working
normally, it is not possible to
switch to the backup RIS-OUT.
(10) Back button Closes the screen.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Because examination status is not output to a higher
system when the switch of output is [OFF], the higher
system cannot manage examination status, and com-
pleted examinations may remain in a list. Do not set
the switch of output to [OFF] except at the time of a
higher system problem.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
6.8.9 EMR Image
The information (image) of electronic medical records
connected to this device can be conrmed.
(5)
(6)
(7)
(3)
(4)
(2)
(1)
Number Name Functions
(1) EMR Image
The electronic medical
record name, type, and error
description are displayed.
(2) Status
Higher system output path,
folder type, and device con-
dition are displayed.
(3) Image
The number of untransmitted
images is displayed.
(4)
Output switch
button
Switches between [ON] and
[OFF] of output to an elec-
tronic medical record. Out-
puts when set to [ON], and
does not output to an elec-
tronic medical record when
set to [OFF] and the output
reservation (queue) remains
in this device. Switches be-
tween [ON] and [OFF] every
time the button is pressed.
(5)
Output reserva-
tion list
Output reservations (queues)
remaining in this device are
displayed.
(6)
Delete button,
Select All
button,
Clear All button
Deletes output reservations
being displayed in the output
reservation list. Select a
displayed output reservation
and press [Delete] to delete.
To delete all output reserva-
tions, press [Select All] and
then press [Delete]. When
[Clear All] is pressed, the
selected state is released.
(7) Back button Closes the screen.
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Because exposed images information is not output to
a higher system when the switch of output is [OFF],
the higher system cannot display the exposed images.
Do not set the switch of output to [OFF] except at the
time of a higher system problem.
•••••••••••••••••••••••••••••••••••••••••••••••••••••