Konica Minolta CS-7 - Page 311

311
7.14 Merging and separation of studies
Chapter 7
• If you press [To List] on the selection screen that is
displayed when multiple relevant studies have been
found, you return to the list screen. If the destination
study is not found after searching is carried out using
the correct search terms, return to the list screen and
redo the search.
• Press [Cancel] to return to the search screen. When
there is a mistake in the search terms, return to the
search screen, enter the correct search terms, and
redo the search.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Press [Image Move].
• Press [Cancel] to return to the search screen.
• The Image Move screen is displayed.
HINT
•••••••••••••••••••••••••••••••••••••
• Note that studies are combined if you press [OK] on
the conrmation screen.
• Press [Cancel] on the confirmation screen to return
to the search screen. If the search conditions are not
correct when checked, press [Cancel] to return to the
search screen and reenter the correct search terms.
• Studies other than completed, suspended, or unex-
posed studies cannot be combined. If an attempt is
made to combine such studies, the following dialog
box appears. Press [OK] to display the Image Move
screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
6
Select images to move.
• Press an image to select it. Press it again to
cancel the selection.
• Multiple images can be selected.
• The image is selected.
HINT
•••••••••••••••••••••••••••••••••••••
• By selecting an area while holding down the Shift key,
you can select multiple images in the area.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7
Press [ ].
• The selected image is displayed at the end of
the image list area to which the images have
been moved.
• The background color of the moved image is
displayed in blue or orange (color of the patient
information display area of the source study).