Konica Minolta CS-7 - Film Output

316
7.16 Print composer
7.16.2 Film output
The following describes the procedure for laying out
and outputting the exposed image.
1
Select the [Filming] tab.
• If you select the [Filming] tab, the [Filming] tab
of the control panel is automatically displayed. If
the tab is not automatically displayed, select the
[Filming] tab manually.
2
Set the output conditions on the control
panel (lming).
HINT
•••••••••••••••••••••••••••••••••••••
• You can also select the xed format by pressing the
Fixed format selection button.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• If you drag an exposed image into the film editing
area, the assignment completed checkmark is dis-
played on the image in the examination display area.
• If you output an exposed image, the output completed
checkmark is displayed on the image in the study dis-
play area.
• In the viewer screen, the image in the selected box is
displayed.
• You can also zoom in or out by rotating the mouse
wheel up or down on the image.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
z
Control panel (Filming)
This control panel is used for setting the output condi-
tions.
(1)
(2)
(3)
(4)
Number Name Functions
(1) Destination
Selects the output destina-
tion.
(2) Film Size Selects the lm size.
(3) Direction Selects the lm direction.
(4)
Preset selection
list
Selects the output format
from the registered preset.