Konica Minolta DiMAGE G500 - Setting the Auto Power-OFF Time; Resetting the File Numbers

104
Using the Set-up Menu (Cont’d)
1
1
Setting the Auto Power-OFF Time
- You can change the Auto Power-OFF interval starting at 3 minutes
(default).
1. Select “AUTO POWER OFF”, press
right and the settings screen
appears.
Use up or down to select “10 min”
or “OFF” and then press either right
or the MENU/SET button. The set-
ting is completed and you return to
the Set-up menu.
• If you press left, the setting is invalidated
and you return to the Set-up menu.
Resetting the File Numbers
- You can reset your file numbers.
1. Select “NUMBER RESET”, press
right and the settings screen
appears.
Using up or down, select “ON” and
press either right or the MENU/SET
button. The setting is completed.
• If you press left, the setting is invalidated
and you return to the Set-up menu.
Reference:
• At initial setting, “NUMBER RESET” is turned “OFF”, and it will assign con-
secutive file numbers as follows.
XXXXX1.jpg, XXXXX2.jpg, XXXXX3.jpg…
• If there are no images shot on the card when “NUMBER RESET” is turned
“ON”, it will attach numbers starting with XXXXX1.jpg. If pictures exist, the
number following already existing file numbers will be given.