95
Using the PLAY Menu (Cont’d)
4. Returning to screen 2, select “TO”.
Then the screen shown left (screen
4) appears. After pressing right, use
up or down to select the destination
media, then press right or the
MENU/SET button.
• If you press left, the settings will be
invalidated and you return to screen 2.
• If the selected media doesn’t have
enough free space, or if a card is not
inserted,you will return to screen 4.
5. Returning to screen 2, select
“UNIT”. Then the screen shown left
(screen 5) appears. After pressing
right, use up or down to choose
“SELECT” (if you are moving one or
multiple images), or “ALL” and then
press the MENU/SET button.
The settings are complete and you
will return to screen 2.
• If you press left, the setting is invalidated
and you return to screen 2.
6. After you have made all the set-
tings, select “ENTER” and press
either right or the MENU/SET but-
ton.
• If you chose “SELECT” in screen 5, go to
Step 7; if you chose “ALL”, go to Step 9.
• If you press left, the settings will be
invalidated and you return to screen 1.
4
5
6
To Next Page
Loading...
