77
USB TRANSFER MODE
The USB transfer mode must be specified depending on whether images are transferred
to a computer or printed directly. The data-storage option must be selected to transfer
data from the camera to a computer or when using the DiMAGE Viewer software. The
PictBridge option allows images to be printed directly from the camera with a PictBridge
compatible printer (p. 92). See navigating the setup menu section on how to open and
use the menu (p. 62).
Use the left/right controller keys to select the basic-setup
menu section.
Use the up/down keys to select the USB transfer mode
option.
Press the set button to change the USB transfer mode
between data storage and PictBridge.
Data storage
PictBridge
To Next Page
Loading...
