93
AUTO POWER OFF - DATA-TRANSFER MODE
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation. Unplug the USB cable and turn off the
camera. Remake the USB connection by reattaching the cable and turning the camera
on.
QUICKTIME SYSTEM REQUIREMENTS
IBM PC / AT Compatible
Pentium-based or compatible computer
Windows 98, 98SE, Me,
2000 Professional, or XP.
128MB or more of RAM
To install QuickTime, follow the instructions
in the installer. Macintosh users can
download the latest version of QuickTime
free of charge from the Apple Computer
web site: http://www.apple.com.
To Next Page
Loading...
