18 GETTING UP AND RUNNING
INSTALLING AND REMOVING A MEMORY CARD
This camera has approximately 15 MB of internal storage so images can be recorded
without a memory card. For more memory capacity, an SD (Secure Digital) Memory Card
or MultiMediaCard can be inserted into the camera. When a card is inserted, images are
saved on the card. For more about memory cards, see page 108.
Always turn off the camera and confirm the indicator lamp is not lit before
changing the memory card, otherwise the card may be damaged, and data lost.
1.Slide the card-chamber door toward
the back of the camera to release the
safety catch. Open the door.
2.Insert the memory card all the way
into the card slot and then release.
The card should catch in the slot.
Insert the card so the face is toward
the back of the camera. Always push
the card in straight, never at an
angle. Never force the card. If the
card does not fit, check that it is
orientated correctly. If a
MultiMediaCard is inserted
incorrectly, it will lock, but the card
chamber door will not close.
2
1
To Next Page
Loading...
