19
3.To eject a memory card, press the card into the slot
and release. The card can now be pulled out.
4.Close the card-chamber
door and slide it toward the
camera to engage the safety
catch.
TURNING THE CAMERA ON
INTERNAL-MEMORY INDICATOR
To turn the camera on, slide the lens cover open in the
direction indicated in the illustration. When the camera is
initially turned on, the date and time need to be set, see the
following page. The monitor may turn off for a few seconds
while the flash charges when the camera is turned on.
Slide the lens cover in the opposite direction to turn off the
camera. Always store and transport the camera with the
lens cover closed.
4
3
The internal-memory indicator in the recording and playback modes indicates
the camera’s internal memory is being used. When a memory card in inserted
in the camera, the internal memory cannot be used or accessed.
To Next Page
Loading...
