68 PLAYBACK - ADVANCED OPERATION
The edit-movie option in section 2 of the playback menu (p.
56) allows an unwanted section to be cut from a movie clip.
The movie to be edited must first be displayed in the
playback mode before opening the playback menu. To
display the movie in the internal memory, remove the
memory card from the camera. Highlight “Enter” in the
movie edit option and press the center button of the
controller to open the editing screen.
MOVIE EDITING
Function menu
The function menu indicates the active step in the
editing procedure. The up/down key selects functions.
Find 1st frame of cut.
:function
:find
Find last frame of cut.
:function
:find
Use the left/right keys of the controller to display the
first frame of the section to be cut. The bar under the
image and the timer in the top right corner of the screen
show the approximate location of the point.
Use the down key to select the next step.
Use the left/right keys of the controller to display the
last frame of the section to be cut. The bar under the
image and the timer in the top right corner of the screen
show the approximate location of the point.
Use the down key to select the next step.
Slide show
Dissolve
Edit movie
–
On
–
–
–
Frame capture
Crop frame
To Next Page
Loading...
