32 A
DVANCED OPERATION
DRIVE MODES
The drive modes control how
pictures are captured. The
remote-control drive mode is only
available with the date model.
To change the drive mode, press
the drive-mode button (1) until the
appropriate mode is displayed on
the data panel.
Single-frame advance - to take a single image each time
the shutter-release button is pressed (p. 21).
Continuous advance - to take a series of images when
the shutter-release button is pressed and held (p. 33).
Self-timer - to delay the release of the shutter by
approximately ten seconds. Used for self portraits (p. 33).
Remote control - to release the shutter from up to 5m
(16.4ft.) away with the optional Remote Control RC-3 (p.
34). Date model only.
ADVANCED OPERATION
This section covers the advanced features of the camera. Read the
basic operation section before moving on.
1
To Next Page
Loading...
