9
If the strap is not to be used, install the cap using the procedure as shown below.
1
Untie the strap attached to the cap, and remove the strap
from the cap.
2
Attach the strap to the strap hook as shown.
3
Pass the strap through the cap, and knot the end of the strap
so that it does not become detached from the cap.
■
For T-10MA
Install the cap using the procedure as shown below.
1
Pass the loop-end of the strap attached to the
mini cap from the connecting plug side of the
cable, and fasten it to the cable as shown.
To Next Page
Loading...
