Konica Minolta T-10A - Parts Identification; Main Unit Controls and Displays

4
▲When the slide cover is open
1
Receptor Window
2
Display
Mode selector keys
3
[NORM] key ......................... Switches to normal illuminance measurement mode.
4
[⊿] key .................................. Switches to illuminance difference/ratio measurement
mode, and switches the displayed value between
the illuminance difference and ratio.
5
[Σ] key .................................. Switches to integrated illuminance measurement mode
and displays the measured integrated illuminance.
6
Analog output terminal ..................... Outputs an analog signal to a recorder etc.
7
USB terminal .................................... Use to connect this instrument to a PC using
USB cable T-A15, a standard accessory.
8
AC adapter terminal ......................... Connect the optional AC adapter (AC-A308 or AC-A311)
to this terminal.
9
Printer output terminal ..................... Outputs measured data to a printer or other peripheral.
10
Slide cover
Names and Functions of Parts
T-10A
1 2 3 5
Mode selector keys
4
13
15
12
11
14
6 8 97 10