5
11
[SET] key ............................. • Activates SET mode.
• Confirms the numeric setting.
12
[▲][▼] keys .......................... Changes the currently set value and decimal point position.
13
[
▼
/D-OUT] key .................... In normal mode, this key is used to output data to a
personal computer or printer. In SET mode, this key is
used to shift from one digit to another when changing
the currently set value using the [▲] and [▼] keys.
14
[CCF] key ............................. Sets the color correction factor.
15
[CALL] key ........................... Calls the currently set data.
16
Tripod fixing screw hole
17
Receptor head remove button ......... Press this button to detach the receptor head from the main body.
18
HOLD button
RUN state ................................. The button is pushed out. Measurement
is performed repeatedly.
HOLD state ............................... The button is pushed in. Measurement is paused and
the measured value in effect just before measurement
was paused is held. Pushing this button and releasing
it again will place the instrument in RUN state.
19
Power switch
20
Battery cover
21
Strap hook
22
Measuring-unit selector ................... Allows selection of lx or fcd.
(Screen examples given in this manual are mainly for lx.)
(Inside the battery chamber, refer to page 8)
16
19
17
18
20
21
22
To Next Page
Loading...
