To Next PageTo Next Page
Need help?Do you have a question about the Konig PA-AMP2400-KN and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | - channels |
| Peak power per channel | 120 W |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.3 % |
| RMS power output per channel (4 Ohm) | 60 W |
| RMS power output per channel (8 Ohm) | 40 W |
| XLR out | 4 |
| AC (power) in | Yes |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | Binding post |
| Purpose | Performance/stage |
| Product color | Black |
| Rack capacity | 2U |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 242 mm |
|---|---|
| Width | 483 mm |
| Height | 88 mm |
| Weight | 5500 g |
Provides essential airflow for cooling the amplifier unit.
Adjusts audio output levels for left and right channels.
Displays signal, peak power, and power status.
Controls the main power supply for the amplifier.
SPK/XLR outputs for connecting speakers or audio sources.
RCA and 6.3mm Jack inputs for audio signal reception.
Connection for the amplifier's mains power supply.
Details maximum and rated output power across different impedances.
Specifies frequency response range and harmonic distortion levels.
Covers input impedance, sensitivity, and connector types.
Includes dimensions, weight, cooling, and power needs.
Warnings regarding electric shock and product opening.
Guidelines for cleaning and maintaining the product.
Details on warranty, design changes, and trademark recognition.
Instructions for proper disposal of electronic waste.
