•
ONLY USE AN ELECTRICAL EXTENSION CORD IF IT IS IN PERFECT
CONDITION.
•
NEVER LET THE POWER CORD RUN OVER SHARP EDGES; AVOID
CRUSHING IT.
•
DO NOT LEAVE THE APPLIANCE EXPOSED TO ATMOSPHERIC
ELEMENTS RAIN, FROST, SUN, ETC..
•
NEVER USE THE APPLIANCE:
WITH WET OR DAMP HANDS;
IF IT HAS BEEN DROPPED AND HAS OBVIOUS CRACKS OR
MALFUNCTIONS;
IF THE PLUG OR POWER SUPPLY CABLE IS DEFECTIVE;
IN DAMP OR GASSATURATED ENVIRONMENTS.
•
DO NOT COVER THE APPLIANCE WITH TOWELS, CLOTHING, ETC.
•
PLACE THE APPLIANCE ONLY ON HORIZONTAL AND STABLE
SURFACES, AWAY FROM SHOWERS, BATHTUBS, SINKS, ETC.
•
IF THE APPLIANCE GETS WET OR COMES INTO CONTACT WITH
WATER, DO NOT USE IT AND HAVE IT CHECKED BY A SPECIALISED
LABORATORY.
•
ALWAYS REMOVE THE PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE CARRYING OUT ANY
CLEANING OR MAINTENANCE WORK.
•
IF THE POWER CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER OR BY ITS TECHNICAL ASSISTANCE SERVICE
OR IN ANY CASE BY A PERSON WITH SIMILAR QUALIFICATIONS, IN
IN ORDER TO PREVENT ANY RISK.
•
ANY REPAIRING OPERATION MUST ONLY BE CARRIED OUT BY A
SPECIALISED TECHNICIAN. REPAIRING THE APPLIANCE YOURSELF
To Next Page
Loading...
