1. Stand Fan
1. Front grill
2. Blade
3. Rear Grill
4. Motor
5. Switch
6. Stand
7. Base cover
8. Screw
9. Base
2. Floor fan
3. Wall fan
MANTEINANCE
1. As further precaution, it is recommended to use pliers to remove the front grid. Remove the screws
and the clips from the outside plastic ring in order to disassemble the front grid.
2. Use the appliance in dry places with a low humidity level.
3. Keep the fan clean. Dry clean the appliance with a cloth and normal soap.
4. Do not use corrosive cleaners.
5. Clean and cover the fan before storing it.
1. Front grill
2. Blade
3. Rear Grill
4. Motor
5. Switch
6. Base
MANTEINANCE
1. As further precaution, it is recommended to use pliers to remove the front grid. Remove the screws
and the clips from the outside plastic ring in order to disassemble the front grid.
2. Use the appliance in dry places with a low humidity level.
3. Keep the fan clean. Dry clean the appliance with a cloth and normal soap.
4. Do not use corrosive cleaners.
5. Clean and cover the fan before storing it.
To Next Page
Loading...
