15
USAGE INSTRUCTION
CLEANING
- Fit the mixing cup (C) onto the Motor unit (D), and then lightly wriggle
the blend flask until screw in the motor unit.
- Please put the mass food in the mixing cup. Please attention that the
food fill the mixing cup more than the highest line. Yon can see the hi-
ghest standard line was printing in the blend flask.
- Fit the lid (B) into the mixing cup (C), and then screw firmly.
- Plug the appliance in, and then turn the ON/OFF button to:”1” or
“pulse” position.
- After blended, please turn the ON/OFF button to “0” position.
- Wait for the motor unit stopping, and then move the mixing cup.
- Move the lid by spinning it in the opposite direction, then remove.
- Press the PULSE button ti clean the mixing cup
- To clean the mixing cup, fill it with some water,
- Press the PULSE button for a few seconds.
- To move the mixing cup and wash it in water.
- Do not clean the motor unit in water; wipe the motor unit with damp
cloth.
- Do not use boiling liquids,
- Do not operate it when it is empty.
- Do not operate the machine for long time than 3 minute at a time.
- If you need to operate the machine for more than 3 minutes, please
turn it off a few minutes before using it again.
To Next Page
Loading...