VOORUI
There is no image on the
screen and the power
LED blinks every 0.5 to
1 second.
Video playback is
choppy.
The monitor is no sound.
The volume is too low.
Video is available but
there is no sound.
An energy efficiency
prompt appears on the
monitor or "XXS Power
down. MENU Key Cancel"
appears in the upper left
corner of the monitor
The monitor quickly goes
to a black screen state
(no display)
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal
operating mode.
Observe whether the computer operates or restarts the device through the
PC keyboard Caps Lock.
Playback of high-definition large video files can be choppy.
This may be because the video player is not optimized for the PC resource.
Try playing the file on another video player.
If the input device is connected using an HDMI-DVI cable, no sound will
be heard. You should be connect the device using an HDMI cable or
a DP cable.
Re-check the condition of the connected audio cable and/or adjust
the volume.
Check the volume.
Check whether audio is set to mute.
The monitor sound output is not set, refer to [ 4.3 Display Sound
Output Setting ]
Volume adjustment.
If the volume is still low after turning it up to the maximum level, adjust the
volume on your PC sound card or software programme.
No sound can be heard if the input device is connected with an
HDMI-DVI cable.
Connect the device using an HDMI cable or a DP cable.
The monitor sound output is not set, refer to [ 4.3 Display Sound
Output Setting ]
When you buy and sell European products, European regulations have
energy efficiency requirements
Under the power setting state, the monitor is turned off for a short time
Windows settings==>system==>power and sleep==>screen==>Reset
the TIME
19
To Previous Page
Loading...
